WIR SYS TX75 C-S

Midrange Infrared System

Product Highlights

2.3/2.8 MHz
Meets ADA accessibility guidelines
Made in the USA

Description
Features
Specs
Accessories
Downloads

Description

NEW mid-range infrared system, includes slave unit for up to 24,000 sq ft coverage.

System operates at 2.3/2.8 MHz.

System Includes

(1) WIR TX75 C 2-Channel infrared transmitter (2.3/2.8 MHz)

(1) WIR TX75 S slave emitter

(2) WIR RX22-4 four-channel selectable, infrared receivers
(2) EAR 022 surround earphones

(2) NKL 001 neckloops

(2) BAT 001-2 Two AA Alkaline Batteries
(1) MIC 049 Table top conference microphone
(1) WCA 007 WC 12ft cable
(1) IDP 008 ADA wall plaque

(1) CCS 030 Large carry case

(1) Table-top tripod

Features

Meets ADA compliance.
Complete system with carry case.
Portable, quick, easy set-up.
Up to 24,000 sq ft coverage when used with RX 22-4 Receiver
Up to (2) TX75-S slave emitters available for extended coverage up to 36,000 sq ft. total.
Master unit has troubleshooting lights built in.
Separate Phoenix Contact connector audio inputs for each channel accept balanced or unbalanced line-level inputs, use together for stereo operation or seperately for mono.
Unit senses if ony one channel is in use and doubles the output power on that channel for twice the coverage.
Power-Saving: if no audio is present after a few minutes, unit automatically disables power to IR diodes, reducing power consumption by 80 percent.
Looks great! Sleek, professional styling complements room aesthetics.

Specifications

BAT 001-2

Alkaline, 1.2 Volt

EAR 022

Style	Around-ear speaker
Plug	3.5mm mono
Cord	39"
Driver Size	23 mm
Nominal Impedance	32Ω
Freq. Response	20 - 20kHz
Weight	15g
Max Power Input	30 mW
Sensitivity	118 dB @ 1kHz

IDP 008

10-3/8" (L) x 6-¼" (W) x 1/8" (H)

MIC 049

Color	Black
Weight	33 g (1.2 oz)
Plug	3.5mm mono
Cord	36"
Phantom Powered	No
Nominal Impedance	1500Ω
Operating Voltage	1.2 - 10VDC
Freq. Response	100 - 8kHz
Pick-Up Pattern	Omni
Transducer Type	Electret Cond
Sensitivity	-38dB ± 3dB
Warranty	90 days

WIR RX22-4N Architectural and Engineering Specifications

The receiver shall be a body-pack type with IR detector lens behind face of the unit.
The unit shall have a lanyard for hands-free operation.
The receiver shall have a rotary-type volume control.
The receiver shall operate for 60 hours with two AA alkaline batteries and for 30 hours per charge with NiMH AA batteries.
The receiver shall be charged without battery removal via charger contacts in the case. A drop-in charger accessory shall recharge the batteries in 16 hours when used with CHG 3512 charger.
The receiver shall be housed in an impact resistant plastic case with a hinged battery door that does not separate from the receiver.
The receiver shall receive 2.3 MHz, 2.8 MHz, 3.3 MHz or 3.8 MHz modulated IR signals with 50 µS de-emphasis. The receiver shall have a 3.5 mm stereo phone jack and accommodate low-impedance mono or stereo earphones and headphones.
The receiver shall accommodate neckloop telecoil couplers.
The receiver shall provide 125 dB SSPL90 output with HED 021 headphone and 110 dB SSPL90 with EAR 013 earbud-type earphone.
The system electrical frequency response shall be 25 Hz to 16 kHz, +1, -3 dB and the S/N ratio shall be 60 dB.
The receiver shall have CE, FCC RoHS and WEEE approval. The receiver shall be covered by a five-year parts and labor warranty, excluding earphones, headphones, batteries and chargers.
The receiver shall be the Williams Sound model WIR RX22-4.

WIR RX22-4N

Receiver Style:	Body-Pack, dual-lens detector, lanyard
Size:	4.1" L x 2.85" W x 1.2" H (104.1 mm x 72.4 mm x 30.4 mm)
Weight:	4.5 oz (127 g) with batteries
Color and Material:	Black
Lanyard:	3 ft (0.91 m), allows receiver to be worn around the neck
Operating Temperature:	-10° C to +50° C
Battery Type:	2 x AA, alkaline (BAT 001-2) or NiMH (BAT 026-2)
Battery Life:	Alkaline: 60 hours, NiMH: 30 hours/charge
Battery Drain:	25 mA, nominal
Charging Contacts:	For use only with CHG 3512
Carrier Frequency:	Channel 1: 2.3 MHz, Channel 2: 2.8 MHz Channel 3: 3.3 MHz, Channel 4: 3.8 MHz
De-Emphasis:	50 uS
FM Deviation:	±50 kHz
Signal-to-Noise Ratio:	60 dB min.
Squelch:	Receiver squelches (mutes) at 40 dB S/N ratio
Frequency Response:	25 Hz to 16 KHz, +1 dB, -3 dB, electrical response
Total Harmonic Distortion:	Less than 1%, electrical response
Controls:	ON/OFF/VOLUME: combination thumbwheel knob Channel Selector: four-position rotary switch
Indicators:	Red LED “ON" indicator, flashes to indicate Low battery
Audio Output Jacks:	3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug
Audio Output Power:	15 mW max at 32 Ω
Acoustic Output:	125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013
Sensitivity:	Better than 1 nW/cm2 for 40 dB signal-to-noise ratio
Approvals:	CE, FCC, RoHS, WEEE
Warranty:	5 years on receiver, 90 days on accessories
Compatible Headphones/Earphones:	Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug, HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001

WIR TX75 C Architectural and Engineering Specifications

The infrared transmitter shall consist of an all in one modulator and emitter operating on 2.3/2.8 MHz or 3.3/3.8MHz. The carrier frequency shall use 50kHz deviation and 50µS pre-emphasis.
The transmitter shall have a minimum coverage of 12,000 sq ft with the WIR RX22-4 receiver in single-channel mode.
The transmitter shall be housed in a heavy-duty black plastic enclosure with a durable infra-red transparent front lens. It shall be convection cooled without fans. The transmitter includes an omni-directional mounting bracket for various permanent installations.
The transmitter shall have a line level phoenix jack input for each of the channels. Each channel shall have an audio input level LED. There shall be a single 3.5mm microphone input with gain control. The mic input shall have a channel selector switch.
The transmitter shall have a switch to turn off all indicator LED’s.
The transmitter shall have two RJ45 outputs supplying power and baseband signal to two WIR TX75-S slave emitters via CAT-5e cable. Each RJ45 output shall have a green and yellow LED signaling that the slave emitters are receiving power and baseband signal. A single CAT-5e cable supplies power, signal and digital control to the slave unit up to 100 ft from the transmitter.
The transmitter shall be powered by a 48VDC universal power supply, 50-60Hz, 100-240 VAC input, 19.2W.
The transmiiter shall be covered by a two-year parts and labor warranty, 90 days on accessories.
The transmitter operating on 2.3/2.8 MHz shall be the Williams Sound model WIR TX75 C.
The transmitter operating on 3.3/3.8 MHz shall be the Williams Sound model WIR TX75 D.

WIR TX75 C

Dimensions, Weight:	10.0" W (25.4 cm) x 3.1" D (7.9 cm) x 1.5" H (3.8 cm) w/o faceplate or 2.5" H (6.4 cm) w/faceplate, 0.6 lbs (0.3kg)
Color:	Black with silver colored silk screen and silver colored faceplate Optional: white colored faceplate
Power Supply:	Desktop style international power supply with IEC line cord, 100-240 VAC input, 50-60Hz, 24W; 48VDC output
DC Power Input:	2.5mm ID barrel connector, 48 VDC, 0.4A center positive
Power Indicator:	Green LED
Sleep/Power Save Mode:	Shuts off carrier when no audio is present for 3 minutes
Modulation:	FM Wideband, ±50kHz deviation max, 50 μS pre-emphasis
Carrier Frequencies:	WIR TX75 C: 2.3 MHz (Ch1) and 2.8 MHz (Ch2) WIR TX75 D: 3.3 MHz (Ch1) and 3.8 MHz (Ch2) Default at power on = carriers off. Carriers are automatically enabled upon presence of audio.
Emitter IR Power:	0.7 W
Master Only Coverage Area (minimum, 1-Ch mode):	12,000 sq. ft. (464 sq. m.) in single-channel mode with the RX22-4 receiver 6,000 sq. ft. (557 sq. m.) in single-channel mode with the RX15-2 receiver 4,000 sq. ft. (186 sq. m.) in single-channel mode with the RX18 receiver
Audio Inputs / Controls:	Line inputs: Phoenix Contact^® connectors for Ch1 and Ch2 accept line level, balanced or unbalanced audio
Microphone input:	3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (4 VDC bias supply with 2.7k ohm series resistor)
Microphone gain adjust:	Rotary potentiometer
Microphone channel switch:	Selects microphone input to Ch1 or Ch2
Audio indicators:	Yellow LED blinks at nominal audio level. One per channel
Indicators On/Off:	2-position switch turns on/off indicator lights
“to slave" Output/Input:	(2) 8p8c RJ45 connectors output 48VDC 0.4A power, baseband RF and a bi-directional RS-485 bus for control and status communications
Slave Status Indicators (on “to slave" jacks):	Green: Power/Unit Status Yellow: Transmit/Cable Status
Signal-to-Noise Ratio:	70 dB, (line input)
Frequency Response:	95Hz to 17.6kHz, -3dB re 1kHz (line inputs) 125Hz to 17.0KHz, -3dB re 1kHz (microphone input)
Total Harmonic Distortion:	<1% (1 kHz, nominal deviation, line or microphone input)
Operating Requirements:	0-50° C (32°-122°F)
Mounting Kit:	Wall or Ceiling mount: BKT 024 Omnidirectional mount Optional: slave linking bar (MLB 003)
Warranty:	5 Years
Approvals:	CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme
Compatible Receivers:	WIR RX22-4, WIR RX18, WIR RX15-2