$229.00 New!

PKT 2.0

Pocketalker® Personal Amplifier

Product Highlights

  • Ergonomic, lightweight design
  • Extended high and low frequency range
  • Superior sound quality
  • Internal microphone
  • Built-in T-coil loop compatible
  • Rechargeable ready

Description

Take Flight.

Transform your senses. Listen to life, to the sounds you choose, with the new Pocketalker® 2.0 personal amplifier from Williams Sound.

Designed with you in mind, the 2.0 exudes beauty and grace both inside and out. Clean lines designed for comfort and style. Cutting-edge technology clearly in tune with your life.

So, spread those wings. Personally tailor your listening experiences with the 2.0’s superior sound and unparalleled frequency range. Hear more of what you want to hear, when you want, where you want.

Amplify your life... with Pocketalker 2.0!

 

System Includes

(1) PKT 2.0 personal amplifier (includes internal microphone)
(1) EAR 042 dual stereo isolation earphones
(1) HED 024 stereo headphones
(1) MIC 014-R plug-in (no cord) microphone
(1) BAT 010-2 two AAA alkaline batteries
(1) WCA 007 WC 3.5mm male to 3.5mm female cable with mounting clips
(1) RCS 003 lanyard

All accessories can be purchased separately

pockettalker, pocket talker, talker, pocket, pocettalker, pocetalker
Pkt e1 angle nb

Features

  • Ergonomic, lightweight design
  • Extended high and low frequency range
  • Superior sound quality
  • Internal microphone
  • Built-in T-coil loop compatible
  • Rechargeable ready

Specifications

PKT 2.0

Dimensions:

4.9" L x 2.0" W x 1.0" H. (124mm x 51mm x 25mm) (Not including clip or microphone assembly)

Weight:

3.1 oz. (88 grams) (with batteries)

Color/material:

White ABS/Polycarbonate molded plastic case.

*Battery Type:

Two 1.5V (AAA size),  Alkaline* or NiMH rechargeable* 

(Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH recommended)

Battery Life:

Up to 105 hours (typical usage) with the BAT 010-2.

Low Battery Indicator: Power “On" Green light on front panel flashes.

**NiMH battery Charging:

Charging: 16 hours with BAT 022-2.  Red LED blinks when charging.

End of Charge: Red LED is on solid.  At end of charge, maintenance charge is provided.

NOTE: Charging requires optional charging kit BAT KT7 or BAT KT8.

Microphone:

Internal, omnidirectional MEMS microphone (micro-electro-mechanical system).

Optional External, omnidirectional, plug-in electret microphone with foam windscreen and 3.5mm mono plug (MIC 014-R).

T-Coil:

Internal with on/off switch and LED indicator.

Tone Control:

External rotary control knob allows user to adjust high/low frequency to optimize hearing.

***Balance Control:

Adjusts Left/Right Volume Balance

Power/Volume Control:

External rotary volume control knob with integrated power ON-OFF switch.

Microphone Jack:

3.5 mm, stereo mini plug. 

Tip=Mic signal, Ring=NC, Sleeve=Gnd.

Headphone Jack:

3.5 mm, stereo mini plug. 

Tip=Left/Mono, Ring=Right, Sleeve=Gnd.

Optional Accessories:

Clip: CLP 014; Allows the user to clip MIC 014 to clothing such as a lapel or shirt pocket.

Lanyard: RCS 003; Allows user to wear unit around the neck, or  as a wrist strap.

3.5mm-3.5mm Extension Cord: WCA 007 WC; extends an external microphone to 12 ft.

Stereo Earphones / Headphones / Neckloop:
EAR 042 / HED 024, HED 036 / NKL 001-S (stereo) Neckloop
 
Mono Earphones / Headphones / Neckloop***:
EAR 013, EAR 008, EAR 022, EAR 041 /
HED 021, HED 027 / NKL 001 (mono) Neckloop

Charging Kits:  BAT KT7 (US), BAT KT8 (Intl)

Approvals:

RoHS, WEEE, FCC, IC

Warranty:

5 years, parts and labor (90 days on accessories)

 

Electrical Specifications (1 kHz Sine Wave reference) Typical

Power output:

52 mW (max) into 32 ohms (Stereo)

ALC:

Automatic Level Control; Limits maximum output level

Distortion:

1% THD (max)

Max gain:

63 dB at 2.5 kHz (Tone=High)

 

Frequency response

Tone Control at high position:

2.7dB boost at 5 kHz, 6.7dB cut at 400 Hz.

Tone Control at mid position:

0.6dB cut at 5 kHz, 2.9dB cut at 400 Hz.

Tone Control at low position:

2.0dB cut at 5 kHz, 3.0dB boost at 400 Hz.

*Battery switch must be in correct position for battery type being used.

**Charging requires optinal charging kit BAT KT7 (USA) or BAT KT8 (International).

***When using mono earphones, headphones or neckloop, the balance control on the Pocketalker must be turned fully counter-clockwise (to the “mono" position) for best volume and battery life.

Accessories for Pocketalker Personal Amplifier [PKT 2.0]

BAT 010-2 Two AAA alkaline batteries

BAT 022-2 Two AAA NiMH rechargeable batteries

BAT KT7 Charger for Pocketalker 2.0 - USA

BAT KT8 Charger for Pocketalker 2.0 - International

EAR 042 Dual, in-ear, isolation earphones

EAR 043 Replacement Eartips

HED 023 Replacement Earpads

HED 024 Stereo Headphones

HED 036 Rear-wear, stereo headphones

MIC 014-R Plug Mount Mic

MIC 027 Handheld unidirectional microphone

NKL 001 S Neckloop 18" (stereo plug)

RCS 003 Lanyard for Digi-Wave Receiver

STD 005 Tabletop microphone stand for MIC 027

WCA 007 WC 3.5mm male to 3.5mm female cable with mounting clips (12 ft)

downloads

Download/View Name Type Language
Pocketalker 2.0 Manual - English, Spanish, French Manuals English, Español, Français
Pocketalker 2.0 Brochure Brochures English
Pocketalker Cleaning Instructions Technical Bulletins English
Pocketalker 2.0 Specifications - English Specifications English

Videos

We have no other products in this category.